Assigning Functions To The Foot Switch - Boss Dr. Rhythm DR-3 Owner's Manual

Assigning Functions to the Foot Switch

You can assign functions other than starting and stopping
performances and switching verses to the foot switch.
fig.04-01p
1.
Press the [EDIT] button.
2.
Press [ ] to select a <SYSTEM>.
fig.04-02d
3.
Press [ENTER].
4.
Press [ ] [
If you have two foot switches connected using the special cable
(PCS-31), select <FS1> when making settings for the foot switch
with the white ring, and <FS2> when making settings for the foot
switch connected using the plug with the red ring.
fig.04-03d
5.
Turn the VALUE dial to select the function to be assigned.
Refer to the following chart to see which functions can be
assigned.
Press [EXIT] a number of times to return to the previous screen.
] to select a <FS1> or a <FS2>.
Chapter 4 Controlling the Styles with a Foot Switch
With the factory settings,
<FS1> is set to "INTRO/END"
and <FS2> is set to "VERSE,
LOOP."
49