Error Messages - Roland KR-15 Owner's Manual

Error Messages

Indica-
tion
To protect the copyright, this music file cannot be
saved as an SMF.
Error 00:
Also, the music file can not be saved. If you want to
save it, please save on the same floppy disk.
You can only read the music file. It can not be saved
Error 01:
on a floppy disk or user memory.
The protect tab on the floppy disk is set to the
Protect position (p. 6). Change it to the Write
Error 02:
position.
Repeat the procedure.
This floppy disk cannot store the format or save any
Error 03: data.
Insert a different disk and repeat the procedure.
The data cannot be saved onto this floppy disk
Error 04: because the format is different. Use the floppy disk
in the same format.
A new song cannot be written on this song. Select a
Error 05: different song number or use a different floppy
disk, and repeat the procedure.
No disk is connected to the disk drive.
Error 10:
Insert the disk correctly, and repeat the procedure.
There is not sufficient space left on the floppy disk
or User memory for the data to be saved.
Error 11:
Insert a different floppy disk or delete files on user
memory, and repeat the procedure.
The floppy disk inserted into the disk drive can't be
read. Be sure you're using Roland SMF Music Files
or other music files compatible with Roland digital
Error 12: pianos (p. 201). Also, if you want to save your work
on floppy disk, you need to format the floppy disk
first (p. 114).
For more on CDs that can be read, refer to p. 82.
The disk was removed from the disk drive while
Error 13: reading or writing was in progress. Insert the disk
and repeat the procedure.
This disk or user memory is damaged and cannot
Error 14: be used. Insert a different disk and repeat the
procedure or format the user memory (p. 165).
This song or music style cannot be read. Please use
a Roland SMF Music Files or Roland Digital Piano
Error 15: compatible music files (p. 201). Also, you can only
use User Programs that have been saved with the
KR (p. 123).
The KR cannot read the disk or user memory
quickly enough. Press the [
Error 16: button, then press the [
[ (Play/Stop)] button to play the song.
For more on CDs that can be read, refer to p. 82.
Meaning
(Play/Stop)]
(Reset)] button and
Indica-
tion
The selected image data cannot be displayed. If it
cannot be made to appear either on the KR's display
Error 17:
or the external display, you will need to prepare
image data that can be used with the KR (p. 164).
The internal memory capacity of the KR is full. Save
the song data on a floppy disk (p. 116) and
Error 30:
delete the song or the User style data stored on the
KR memory.
The KR cannot deal with the excessive MIDI data
Error 40: sent from the external MIDI device. Reduce the
amount of MIDI data sent to the KR.
A MIDI cable or computer cable has been
Error 41:
disconnected. Connect it properly and securely.
An excessive amount of performance data has been
sent to KR in one time and therefore could not be
Error 42:
recorded. Change the tempo more slowly to record
the performance again.
The Computer switch is set to a wrong position or
the computer is set wrongly. Switch off the KR then
Error 43 set the Computer switch to the correct position and
set the computer correctly. After that, switch on the
KR again.
There may be a problem with the system. Repeat
the procedure from the beginning. If it is not solved
Error 51:
after you have tried several times, contact the
Roland service center.
Error 61: Moving Key Error.
Stop use immediately, and contact the nearest
Error 62:
Roland Service Center.
Automatic Keyboard System or CD Drive Error.
Error 63: Stop use immediately, and contact the nearest
Roland Service Center.
Meaning
183