Applying Effects To The Sound (Effects) - Roland KR-15 Owner's Manual

Chapter 1 Performance

Applying Effects to the Sound (Effects)

You can apply a wide range of different effects to the notes you play on the
keyboard.
1.
First, press the Tone button to select a Tone (p. 27).
The "Tone selection screen" appears.
2.
Then, touch <Effects>.
The "Effect screen" appears.
fig.d-effects.eps_60
Applying effects to the sound
3.
Touch <ON>.
The effect selected with <Type> will be applied.
Setting the Effect
4.
Touch <Type>
5.
Touch <Depth>
The amount increases as the value is raised.
You can also move the slider with the [-] [+] buttons and the dial.
Pressing the [-] [+] buttons simultaneously returns the slider to the initial value.
Touch <Exit> to return to the Tone selection screen.
Cancelling the Effect
6.
On the Effects screen, touch <Off>.
About the Effect Settings
When the effects is set to ON, the appropriate effect is applied for the currently
selected sound. You can also apply different effect types to each tone (except GS
tones and tones with the "
to their initial settings, carrying out Memory Backup (p. 165) allows you to save and
store the settings even after the power is turned off.
42
to select the type of effect.
to adjust the amount of effect applied.
" logo). Although turning off the power returns effects
For more on the effect types,
refer to the "Effects List" (p.
191).
NOTE
Selecting a different effect for
the left-hand Tone than the
one applied to the right-hand
Tone and Layer Tone may not
result in the effect you want.
Select the same effect as that
used for the right-hand Tone.
NOTE
When you select an effect type
that starts with "GS," that type
of effect is also applied for the
chorus effect for the song or
Music Style (p. 58) selected at
that time.
All [Voice] button tones with a
"GS" or " " logo appearing
after the tone name have the
same effect applied to them. If
the effect for one of the tones
with the "GS" or " " logo is
changed, then the effects for
the other tones with the "GS"
or " " logo are also changed
automatically.