Table of Contents
Advertisement
❍ If the following screen appears
The following screens appear when a registration has already been saved to
the save destination.
fig.07-12
● If you wish to update the contents of the Registration deta
1.
Press the [Rec] button.
The Registration will be rewritten.
● If you wish to save the data without erasing the Registration
set already on disk
1.
Press the [Reset] button to cancel the procedure.
Rewriting of the Registration will be canceled.
2.
Press the Select [-] [+] buttons to select a number for which
"- - -" is displayed on the upper right of the screen.
3.
Press the [Save] button to save the Registration set.
When the data has been saved, the basic display reappears.
When the Registration set is saved to the floppy disk, the indication of
"- - -" will change to "USE."
Using the Registration Buttons
57
Advertisement
Table of Contents
