Select A Location For The Printer - DataCard CE870 Quick Install Manual

CE870 Instant Issuance System Quick Install Guide
Refer to your printer's Installation and Administrator's Guide,
found on the Owner's Library CD, for detailed installation
instructions.

1. Select a Location for the Printer

• Install the printer in a location that is clean and well
ventilated, free of vibration or shock.
• For venting and clearance, choose an area that has the
following measurements:
• Single-Hopper System: 27 inches (686 mm) wide,
31 inches (788 mm) deep, and at least 27.4 inches
(696 mm) high.
• Multi-Hopper System: 28 inches (711 mm) wide,
41 inches (1041 mm) deep, and at least 30 inches
(762 mm) high.
Refer to the printer's Installation and Administrator's
Guide for complete site requirements.
• Do not install the printer in direct sunlight.
• Install the system in a secure location.
• Install the system in a location that has access to two
AC outlets and a network port.
2 CE870 Instant Issuance System