Optional Accessories - Bowflex SelectTech 560 Assembly & Owners Manual

8. Be sure the entire Dumbbell Handle Assembly is properly tightened. Do this by setting the Adjustment Grip to 5 lbs and removing the
Handle Assembly from the Base. Push and pull the Knobs toward and away from the Adjustment Grip. The Knobs should not exhibit free
play and all of the selection discs should feel tightly connected.
9. You have now tested the function of the locking mechanism. We suggest you repeat this test monthly to make sure that the locking
mechanism operates correctly.
Do not use the Handle Assembly to lift the Dumbbell and Base together. To lift the Dumbbell and Base together, fully engage the
Weight Plates and use the Lifting Handles molded into the Base Assembly.
If the dumbbell locking mechanism operates unsatisfactorily in the test procedure above, do the following:
a. Stop use of the product immediately until approved service is available.
b. Contact your Bowflex retailer or contact Nautilus Customer Service directly by phone at 1-800-NAUTILUS (628-8458) for service.

Optional Accessories

Bowflex SelectTech 560 Stand
® ®
Additional products are available from Nautilus, Inc. at www.bowflexcatalog.com
9
Assembly / Owner's Manual