Output Adjust; Digital Channel; Version Info; Version - Videocon WallCam Quick Setup Manual

Picture 3.6 Playback
Speed: Set the PTZ rotation range. Default range: 1 ~ 8.
Zoom: Click - / + button to adjust the zoom.
Focus: Click - / + button to adjust the focus of the camera
Iris: Click - / + button to adjust the iris of the camera.
Direction control: Control the PTZ rotation. Supports 8 directions controls .
PTZ Trace: Full-screen shows channel image. Press left click of the mouse to control
PTZ rotation orientation.
Set: Enter the function operation menu.
Page Switch: Switch between different windows
3.3.5 High Speed PTZ
After choosing, it displays the chosen channel in full screen mode. Click left button of
mouse to control the PTZ to fast move and orientation. can adjust camera's magnification
function by moving mouse roller

3.3.6 Output adjust

Adjust output area parameters
Picture 3.9 Output
11

3.3.7 Digital Channel

System Information menu items include:
one
key
add,
Channel Management,
Channel
Status.

3.3.8 Version Info

System Information menu include: Version, HDD Info, BPS, LOG, Online Users.

3.3.8.1 Version

Displays the basic information such as hardware information, software version,
MAC,issue date and Serial No and so on.
Note 1: The Serial No is needed when using cloud technology, please enter the
Serial No correctly for remote access otherwise you can't login.
Note 2: MAC is the MAC address of the device, also is the device mark when login by
device with ARSP service; please enter the MAC address correctly while using ARSP
service to access device remotely otherwise you can't login.
（Some
model
without
ARSP
function） 。
Picture 3.10 Version information

3.3.8.2 HDD Info

Display the hard disk state: hard disk type, overall capability, residual capability,the
recording time and so on.
12