Alarm - Videocon WallCam Quick Setup Manual

【EMAIL setup】
If the alarm is turned on or the alarm linkage photos are taken, the same will be sent to
the given email address
Picture 4.9 EMAIL
SMTP server: for example, SMTP server address of 126 email is: smtp.126.com.
Port: Enter email server port number.
Need SSL: Decide whether using Secure Socket Layer protocol to login.
User Name: Enter the email server user name.
Password: Enter the password corresponding to the user.
Sender: Set the email sender address.
Receiver; The device will send the email to appointed receivers when the alarm is turned
on. You can set three receivers at max, and separate each receiver with ";"
( Semicolon + Space), receiver and sender can use same email.
Title: Please enter the subject of the message.
[ DDNS ]
Picture 4.11DDNS
19
(1) Register yourself at www.wallcam.in and choose your domain name.
(2) Go to main menu>>>System settings>>>>Network>>>Net service and select DDNS.
Choose WallCam from dropdown.
Mark on Enable.
(3) Put Domain name, user name and password which gets generated while registering.
(4) Go to your browser and enter domain name .
(5) Enter your user id and password to access live feed of your cameras.
Note：The
DNS
setup
must
be
configured
correctly
in
the
network
setup.
[ Mobile
monitor
]
Via mobile devices, realize the equipment monitoring and other related operations
of the device
Picture 4.15 Mobile monitor
Enable: Select, enable the Mobile phone function.
Port: Port: Port for mobile phone view, you need to do mapping of the port on Router.

4.4 Alarm

Alarm functions include: Motion Detect, Video Blind, Video Loss, Alarm Input, Alarm
Output and Abnormality.
Picture 4.20 Alarm
20