Network; Net Service - Videocon WallCam Quick Setup Manual

Picture 4.4 Recording Plan
Channel: Choose the corresponding channel number to set the channel. Choose all the
options to set all channels.
Redundancy: Choose the redundancy function option to implement the double backup file
function. Double backup is writing the video files in two hard disks. When you do the
double backup, make sure that there are two hard disks installed. One is read-write disk
and the other is redundant disk.
Length: Set the time length of each video file. 60minutes is default duration (A maximum
of 120 minutes can be selected).
Pre Record: Record 1-30 seconds before the action. (Time length is decided by the code
stream)
Mode: Set video state: configuration, all or stop.
Schedule You can select recording type i.e. Regular, Alarm (Detect) and time based
:
recording.
Manual: after choosing manual button, the related channel will carry common recording
irrespective of the current state of the channel.
Stop
Click the stop button to stop recording of the channel.
:

Week: You can set any particular day or even full week for recording. It will record
according to selected days.
Period: Set the time section of common recording, the recording will start only in the set
range.
Recording type: Set recording type: regular, detection or alarm.
Regular Perform the regular recording in the set time section.
:
Detect
The alarm will be triggered and recording will be turned on in case camera
:

signals video loss or covered with mask.
Alarm Trigger the external alarm signal in the set time section. When above alarm is
set as opening recording, the "detection recording" state is on.

.
17

4.3 Network

Picture 4.5 network setup
Net Link Mod: Select automatically or enter IP address manually.
IP address: Set the IP address.
Subnet Mask: Set the subnet mask code.
Gateway: Set the default gateway.
Primary DNS: Set Preferred DNS
Secondary DNS: Set spare DNS
Media port: Set port for recording network transmission
HTTP port: Set HTTP Port
Net Service: set all network services. Pls refer 4.3.1 network service to have detailed
setting description.

4.3 1.Net Service

Advanced network functions on the configuration, double-click the Net Service button to
enter the Picture 4.6 interface, first select the Network Services entry and click the
Settings button, or double-click the service parameter configuration items.
Picture 4.6 network service
18