Remington HKVAC2000 Use And Care Manual

When using an electrical appliance, basic precautions should always be observed,
including the following; read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
Do not use while bathing or in the shower.
■
■ Do not place or store appliance where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
HKVAC2000
Some electrical parts inside the clipper are electrically live, even when the switch
is off.
Use and Care Guide
■ Always unplug the clipper from the electrical outlet immediately after using.
■ Unplug this appliance from the electrical outlet before cleaning
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ An appliance should never be left unattended while plugged in. Do not pull, wrap
or twist cord around appliance.
■ Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended or authorized by Spectrum Brands, Inc.
■ Never operate this appliance if it has a damaged cord or plug. If it is not working
properly, or if it has been dropped, damaged, or dropped into water, return it to
Spectrum Brands, Inc. for repair or replacement.
■ Keep cord away from heated surfaces where oxygen is being administered
■ Never drop or insert any object into any opening on this appliance.
Register Your New Product Today!
■ Do not place appliance on any surface while it is operating.
■ Do not use this appliance with a damaged or broken cutting unit, as injury may
By registering your new Remington ® product, you will receive these important benefits:
occur. Always make certain blades are aligned properly.
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
Emptying Hair Chamber:
3. To trim around
Cleaning & Maintenance
the ears,
1. Turn off the unit.
remove the
Cleaning and Maintaining Your Clipper
2. Hold the underside of the unit with
trimming guide
one hand. Your clipper is fitted with high-quality blades. Cleaning should only be done with a
and replace
soft brush, such as the brush supplied with the unit. Clean your clipper regularly
with either the 3. Locate the grips on the side of
to ensure that the units operating life is not prematurely shortened.
left or right the chamber (fig. 1). Using your
ear guide. The thumb and
■ Unplug adapter from wall outlet
fig. 1
shorter guide forefinger, lift
■ Do not apply pressure or hard objects to the cutters.
teeth are designed to be toward the both sides of
■ Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the
ear. Move the clipper from the front the chamber
units main body.
of the head to the back. This creates at the same
Weekly (or as needed)
time.
a tapered effect around the ear and
Clipper should always be shut off. Remove clipper guard attachment from clipper.
back of the neck.
4. Empty the
fig. 2 Shake or blow out any accumulated hairs.
4. The final trim can be made with the contents
Main clipper
hair clipper or the included scissors. into a waste
1. Remove the blades by pushing upward on the cutter teeth. The (hairpocket)
container.
Make sure to check over the entire
underside of the cutter assembly will be exposed.
(fig. 2)
head for any uneven areas. For styled
2. Blow out any loose hair that has accumulated. Brush out any remaining hair from
hair or giving quick trims, you may
5. You may have
the cutter teeth and hair pocket with the brush provided. Do not rinse the cutter
prefer using your hair clipper without to vigorously shake the chamber or
assembly under water or use cleaning fluids. Apply 2-3 drops of supplied oil to
the trimming guide. scoop out some of the compacted
blades after each cleaning.
hair clippings.
Very Short Styles Troubleshooting
6. Be careful not to puncture the
screens on the hair chamber while
1. Using the Clipper cutters do not move:
emptying the unit.
1/2" (12mm)
■ The cutting unit may be dirty and clogged. Clean the unit as directed in Cleaning
trimming guide, 7. Once finished emptying, place the & Maintenance section. Vacuum not functioning properly:
hold the comb chamber back onto the unit and
■ Ensure that the chamber has been emptied and placed back into the unit
push gently until the chamber
flat against the
properly.
clicks into place.
head and move
■ Check for obstructions in the inlet and air flow path. Fan chamber clogged up:
the hair clipper
■ Remove the hair chamber.
from the back Line Cord Safety Tips
■ Using the cleaning brush that has been provided, gently brush between the
of the neck to the crown of the head.
1. To insert plug, grasp it firmly and
protective exhaust vents. If necessary, blow into the fan chamber. Hair clippings
2. Cut in a similar manner from the side
guide it into outlet. should become loose and fall out.
to the top of the head. Then cut from
2. To disconnect the appliance, grasp
the front to the crown of the head.
the plug and remove it from outlet.
3. If a "Flat Top" style is desired, then
Do not pull or yank on the cord or
remove the trimming guide and use
appliance. Do not wrap the cord
the barber's comb. Trim a little at a
around the appliance.
time until the "flat look" is achieved.
■ Always slide power switch to the "off" position when plugging or unplugging
IMPORTANT SAFETY
from an electric outlet.
■ Always store your clipper in a moisture-free environment. Do not store trimmer in
INSTRUCTIONS
temperatures exceeding 140°F (60°C).
■ Always slide power switch to the "off" position before removing hair chamber as
rotating fan blades are accessible and could pose a hazard.
■ This clipper is designed for use with 110-120 Volts AC, 60 HZ electrical outlets.
Do not connect the clipper to a higher voltage than indicated, as it may result in
personal injury and/or damage to the clipper.
■ This appliance does not contain any user-serviceable parts.
■ This appliance is for household use only.
■ This appliance is not intended for use on pets.
SAvE ThESE INSTRUCTIONS
Warranty
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to: Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532 . For more information call 800-736-4648
in the US or 800-268-0425 in Canada.
Warranty excludes: Storage pouch
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
Product Features
Groomer Parts
A. Hair clipper A.
B. Grips on chamber
(do not squeeze)
C. On/Off switch
G.
D. Hair inlet
E. Fan chamber
F. Hair chamber
G. 1" guide comb
H. 3/4" guide comb
I. 1/2" guide comb
J.
J. 3/8" guide comb
K. 1/4" guide comb
L. 1/8" guide comb
M. Left ear guide comb
N. Right ear guide comb
O. Blade cover
P. Scissors
M.
Q. Sectioning clips
R. Styling comb
S. Cleaning brush
T. Storage pouch
U. Oil bottle
B. C. D. F.
E.
P.
T.
3. In addition, Remington, in its discretion, must determine that the returned product
Performance Guarantee
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
4. Returns should be mailed prepaid (no collect returns accepted) to:
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT Remington 60-Day MBG
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE 507 Stokely Drive, Box 1
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
DeForest, WI 53532
This warranty gives you specific legal rights and you may also have other rights 5. Refund does not include postage costs for the return of the product, but will
which vary from state to state or province to province. Some states do not allow include applicable taxes paid by customer, if any.
the exclusion or limitation of incidental, special or consequential damages.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
Spectrum Brands, Inc. Money-back Offer
7. Please allow 4-6 weeks to receive your refund by check.
If within 30 days after you have purchased your Remington ® branded product,
*Applies to US and Canadian customers' returns only.
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the US or 800-268-0425
in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men's Shave and Groom 60-Day Money Back Guarantee*
®
If within 60 days after purchasing any Remington branded Men's Shave and
®
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call 800-
736-4648 in the US or 800-268-0425 in Canada.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded Men's Shave and
®
Groom product:
a. The Remington product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
How to Use
Before Cutting Hair
1. Make sure your hair clipper is
operating correctly.
2. The vacuum feature will not function
properly if the hair chamber is
removed.
H. I.
3. The person should be seated so that
the top of his head is at your eye level.
4. Comb the hair as it is normally styled.
5. Comb out all knots and tangles.
6. Ensure the hair
is dry. Hair
K. L.
clippers perform
best with dry
hair, making it
easier to see
how much hair
is being cut.
7. Hold the hair
O.
N.
clipper in the
palm of one hand with your thumb
resting firmly on the top of the hair
clipper. This grip provides comfortable
cutting control.
Q.
To Attach Trimming Guides
1. Select the trimming guide that
matches the length you want the
hair to be after the cut. The trimming
guides are numbered and marked
with 1/8" (3mm), 1/4" (6mm), 3/8"
(9mm), 1/2" (12mm), 3/4"(18mm), and
1"(25mm).
R. S.
2. Hold the trimming guide with the teeth
up. Slide the trimming guide onto the
blades until it locks into place.
U.
120 VAC, 50-60 Hz
Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in
Canada or visit RemingtonProducts.com.
Dist. by:
Spectrum Brands, Inc. Middleton, WI 53562
Dist. by:
Spectrum Brands Canada, Inc.
131 Saramia Crescent, Vaughan, ON L4K 4P7
® Registered trademark of Spectrum Brands, Inc. (SBI)
© 2014 SBI
6/14 10321-00
Made in China
T22-0002466
Giving A Comfortable,
Even Cut
■ Allow the clipper to cut through the
hair without moving it too quickly.
Moving the clipper too quickly may
create a pulling sensation. As the
clipper cuts the hair, the vacuum
sucks the clippings through the
inlet into the hair chamber.
■ Use short strokes when cutting, and
initially use the longest trimming
guide. You can always use a closer
trimming guide later if you want a
closer cut.
How to Give a
Haircut
1. Start at the
back of the
head. Holding
the clipper as
shown, lightly
stroke upwards
making sure
you are taking
off the desired amount of hair. Work
your way up to the crown of the
head in layers. When completed,
comb the area
to remove any
loose hair and to
determine if you
need any further
cutting.
2. Repeat the same
procedure for each side of the
head. Make sure the length of the
hair is trimmed to the same length
on both sides of the head.