Canon WUX7000Z User Manual page 205

Projector Web Screen Menu
Item
MAC address
IPv4 DHCP
address
IP address
Subnet
mask
Default
gateway
IPv6 IPv6
address
Autoconfigu-
ration
IP address
Prefix length Enter the wired LAN (IPv6) prefix length
Default
gateway
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Explanation
Shows the projector's wired MAC
address.
Select whether to turn the DHCP
function on or off for wired LAN (IPv4).
The following settings cannot be
configured manually when this setting is
[ON], because the IP address is
acquired from the DHCP server.
[IP address]
[Subnet mask]
[Default gateway]
Enter the projector's wired LAN (IPv4)
IP address in 1-byte numbers.
Enter the wired LAN (IPv4) subnet mask
in 1-byte numbers.
Enter the wired LAN (IPv4) default
gateway address in 1-byte numbers.
Specify on or off for the IPv6 function of
the wired LAN (IPv6).
Choosing [OFF] will prevent you from
configuring the following settings.
[Autoconfiguration]
[IP address]
[Prefix length]
[Default gateway]
Select on or off for the auto setting
function of the wired LAN (IPv6).
Choosing [ON] will prevent you from
configuring the following settings.
[IP address]
[Prefix length]
[Default gateway]
Enter the wired LAN (IPv6) address in
1-byte numbers or letters between A
and F.
in 1-byte numbers.
Enter the wired LAN (IPv6) default
gateway address in 1-byte numbers or
letters between A and F.
205
Factory default setting
The projector's wired
MAC address
OFF
192.168.254.254
255.255.255.0
0.0.0.0
OFF
ON
<Blank>
<Blank>
<Blank>