Canon WUX7000Z User Manual page 164

Menu Description
The following display times are also changed.
Item
- Menu screen
- Edge blending / Corner adjustment (P155)
- Input (P47)
- Keystone (P103)
- Keystone reset (P106)
- Focus (P48)
- Zoom (P48)
- Lens shift (P72)
- Lens shift reset (P74)
- Marginal focus
- D.image shift (P152)
- D.image shift reset
- Aspect (P131)
- Image mode (P140)
- Volume (P34, P39)
- Gamma (P141)
Menu rotation
Rotate menu display. When projecting in portrait orientation, for example, with the projector
installed at a 90° angle, specify the orientation of projected menus to align them with the top
or bottom of projected images.
Option
Automatically rotates menus as needed after using an accelerometer
Auto to determine if the projector is installed in portrait orientation (90°
clockwise or counterclockwise) or horizontally.
Menus are not rotated. Menus are shown in a readable orientation for
Off
projectors installed horizontally.
90 degrees
Menus are rotated 90°. Menus are shown in a readable orientation for
counterclockwise
projectors installed in portrait orientation (90° clockwise or
90 degrees
counterclockwise).
clockwise
• To determine the orientation of menu rotation, projector orientation is detected
immediately after startup or when this setting is switched to [Auto].
• Menus are not rotated automatically in response to changes in projector orientation
during projection.
[Normal] [Extended]
30 seconds 3 minutes
10 seconds 3 minutes
Function
164