Canon WUX7000Z User Manual page 121

Using Menus
The menu screen is divided into 6 tabs as shown below.
[Input settings] tab (P130)
You can set the type of signal or the method of projection of the
images input.
You can adjust the image quality and colors according to
your preference.
Contents of menu
[Image adjustment] tab (P139)
[Install settings] tab (P149)
This setting is used when installing the projector.
[System settings] tab (P161)
You can set the operation of the projector.
These settings are for when using the
projector from a PC via a network.
121
[Network settings] tab (P182)
[Information] tab (P197)
You can check information about
the signal types of the images
projected and other information.
Menu items