Os Update - Denso BHT-1400QWB-CE Software User Manual

6.4.13. OS Update

The OS Update is used to update the Operating System.
Double tap the OS Update icon in the System Properties to open the OS Update menu.
System Properties
File Name:
...（Browse）:
Reboot mode:
Restart Now (Default): Performs an immediate full-reset (cold boot)
Restart Later:
Power off:
Current Ver.:
Update Ver.:
Exec:
Follow the steps below to update the OS.
Step 1 Copy the OS Update file to the BHT, or store the OS Update file
Step 2 Tap the "..." browse button.
The My Device screen pops up.
Step 3 Select the OS update file from the list, then tap OK to close the
Step 4 Tap the Exec button to start the OS update.
The progress screen is displayed during the update.
The BHT performs the process selected in the above reboot mode after
the update is completed.
.
- Note - The file system in the RAM and the registry in the Flash memory
will be deleted after reboot. For this reason, setting up the registry
to automatically restore is strongly recommended.
The steps are shown below.
Step 1 Create the registry file (*.reg) as explained in "6.4.10.
Step 2 Set the registry automatic restore as explained in "6.4.9
OS update file name
The default OS update folder is "\Flash\OSUpdate".
Before updating the OS, copy the OS update file to
the folder.
Opens "My Device" screen to select the OS Update
file.
Select one from the choices below to specify how the
BHT performs after the OS Update.
Returns to this menu
Turns off the BHT.
Current OS version
OS version to update
Starts the OS Update
in the microSD card.
My Device screen.
Registry Editor".
StartupConfig".
- 84 -