6.11.4. Communication Test
If the ActiveSync/WMDC connection is established...
If the ActiveSync/WMDC connection fails...
If the ActiveSync/WMDC connection fails, the ActiveSync icon is not displayed in the task bar.
Tap the 4:COM button in the Test menu to perform the communication
test for the USB interface port.
1:USB:
Performs the USB interface test.
Tap the 1:USB button in the COM menu to start the USB interface test.
The BHT starts connecting to the host computer using
ActiveSync/WMDC.
The pop-up dialog on the left is displayed during connection.
Tap the Hide button to close the dialog or the Cancel button to cancel the
test.
If the ActiveSync/WMDC connection is established, the "Network Begin"
message sounds and the ActiveSync/WMDC icon is displayed in the task
bar (red circle shown on the right).
- 139 -