Reset And Full Reset; Reset; Full Reset - Denso BHT-1400QWB-CE Software User Manual

3.3. Reset and Full Reset

3.3.1. Reset

Reset the BHT when the BHT does not respond to any entry from the touch screen or keys.
1 2 3
4 5 6
9
7 8
. 0

3.3.2. Full Reset

Full reset is required if the problem persists even after resetting.
1 2 3
4 5 6
9
7 8
. 0
With the BHT power ON, press the M1 key + Right Trigger + Power key
at the same time. Then release all the keys.
- Point - Data stored in files will not be lost by resetting.
However, unsaved data currently being edited will be lost.
With the BHT power ON, press the M1 key + M2 key + Left Trigger +
Power key for more than 1 sec. Then release all the keys.
Then release all keys.
- Point - All data including files and settings stored in the RAM will
be lost and the RAM will revert to the factory default when
performing full reset. Back up any important data to the
"Flash" folder or to the computer before full reset.
The BHT starts from the "Initial Setup" when the BHT turns
ON after the data in the RAM is deleted.
- Point -
The Reset and full reset can be performed using,
- The "Reset" menu in the Star menu (Start > Reset).
Refer to "4.2.4 Reset".
- The Reset or Full reset menu in the basic configuration
MENU (MENU > Reset tab or Full reset tab).
Refer to "3.7 Using the MENU key"
- 11 -