Auxiliary Jack - Chevrolet City Express 2018 Owner's Manual

118 Infotainment System
air conditioner controls. Connect the
iPod specific end of the cable to the
iPod and the USB end of the cable
to the USB connection port on the
vehicle. If your iPod supports
charging via a USB connection, its
battery will be charged while
connected to the vehicle with the
ignition on or in ACC/ACCESSORY.
While connected to the vehicle, the
iPod can only be operated by the
vehicle audio controls.
To disconnect the iPod from the
vehicle, remove the USB end of the
cable from the USB connection port
on the vehicle, then remove the
cable from the iPod.
Compatible Devices
Most devices are compatible. Make
sure that your iPod firmware is
updated.
Audio Main Operation
Turn the ignition on or in ACC/
ACCESSORY. Press iPod MENU or
MEDIA repeatedly to switch to the
iPod mode.
If the audio system is turned off
while the iPod is playing, the iPod
plays when the audio system is
turned back on.
If the audio system is off, pressing
iPod MENU or MEDIA turns the
audio system on and plays the iPod.
If the audio system is on, the audio
system automatically begins playing
tracks from the iPod when it is
plugged into the USB port.
SEEK/TRACK
Press or to skip backward or
forward one track.
Press and hold or
1.5 seconds while a track is playing
to reverse or fast forward the track
being played. The track plays at an
increased speed while reversing or
fast forwarding. When the button is
released, the track returns to normal
play speed.
RPT (Repeat)
When RPT is pressed while a track
is being played, the play pattern can
be changed between Repeat Off,
Track Repeat, and All Repeat.
RDM (Random)
When RDM is pressed while a track
is being played, the play pattern can
be changed between Shuffle Off,
Track Shuffle, and Shuffle Off.
0
BACK
0
When
returns to the previous menu.

Auxiliary Jack

for
Using the Auxiliary Input Jack
The auxiliary input jack is on the
center stack. External devices such
as an iPod, laptop computer, MP3
player, cassette player, or CD
changer can be connected to the
auxiliary port using a 3.5 mm (1/8 in)
input cable.
BACK is pressed, it