Specify Basic Wifi Settings - NETGEAR VEVG2660-1TKSAS User Manual

4. Select ADVANCED > WPS Wizard.
5. Click the Next button.
6. Select a setup method:
• Push button. Click the WPS button on this screen.
• PIN Number. The screen adjusts. Enter the client security PIN and click the Next
button.
7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The gateway WPS screen displays a confirmation message.

Specify Basic WiFi Settings

The gateway comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the gateway label. The preset SSID and
password are uniquely generated for every device to maximize your wireless security.
You do not need to change the security
note of the new settings and store the note in a safe place where you can easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer
with a wired connection to access the gateway.

To specify basic wireless settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
VDSL Voice Gateway
settings. If you change the security settings, make a
Specify Network Settings
62