View Or Change Network Folders On A Usb Drive - NETGEAR VEVG2660-1TKSAS User Manual

View or Change Network Folders on a USB Drive

You can view or change the network folders on the USB storage device.

To view or change network folders:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > USB Storage > Advanced Settings.
5. Scroll down to the Available Networks Folder section and view or adjust the following
settings:
• Share Name. If only one device is connected, the default share name is
USB_Storage. (Some gateway models have more than one USB port.)
You can click the name or type it in the address field of your web browser. If Not
Shared is shown, the default share has been deleted, and no other share for the root
folder exists. Click the link to change this setting.
• Read Access and Write Access. Show the permissions and access controls on the
network folder. All – no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the gateway.
• Folder Name. Full path of the network folder.
VDSL Voice Gateway
Share a USB Drive Attached to the Gateway
47