Coupling And Tube Assembly - Roberts Gorden VANTAGE NP CTHN-125 Installation & Operation Manual

Step 9.9 Coupling and Tube Assembly
A
Close coupling
with tab.
C
Insert tubes into coupling.
Step 9.9.1 Coupling and Tube Assembly (Continued)
Tighten slide bar as shown below.
• Repeat Step 9.9 on Page 37, A - D until all tubes are assembled. See Page 38, Step 9.9.2.
NOTE: If coupling is not tight, loss of vacuum can occur.
SECTION 9: M
B
Start slide bar/coupling lock
onto coupling.
D
Tighten coupling to join tubes.
Description Part Number
Coupling
Slide Bar/Coupling Lock
Tube 91409XXX
H I
ULTIBURNER EATER NSTALLATION
01329600
01329700
37