Coupling And Tube Assembly - Roberts Gorden VANTAGE NP CTHN-125 Installation & Operation Manual

CTHN-S I , O
ERIES NSTALLATION PERATION AND
Step 8.7 Coupling and Tube Assembly
A
Close coupling
with tab.
C
Insert tubes into coupling.
Step 8.7.1 Coupling and Tube Assembly (Continued)
Tighten slide bar as shown below.
• Repeat Step 8.7, A - D until all tubes are assembled. See Page 21, Step 8.7 .2.
NOTE: If coupling is not tight, loss of vacuum can occur.
20
S M
ERVICE ANUAL
B
Start slide bar/coupling lock
onto coupling.
D
Tighten coupling to join tubes.
Description Part Number
Coupling
Slide Bar/Coupling Lock
Tube 91409XXX
01329600
01329700