Hmi Application To Create - Omron NA5-15*101 series Startup Manual

1 System Configurations and Startup Procedures
1-3

HMI Application to Create

This guide provides an an example of creating an HMI page (i.e., the data displayed on the screen) by
overlapping button and lamp functions on the page.
Green button-lamp Yellow button-lamp
Page
1 - 4
HMI
Red button-lamp
Implemented on the HMI page.
Implemented with Momentary Button objects.
Implemented with Bit Lamp objects.
HMI Global Variables
Variable
ControllerName_VariableNameA
Variable
ControllerName_VariableNameB
Variable
ControllerName_VariableNameC
These variables are mapped.
On the HMI page, only the functions to control TRUE and FALSE
at the Controller are implemented. The buttons are transparent.
On the HMI page, the functions to read TRUE and FALSE from
the Controller and colors are implemented.
NA-series Programmable Terminal Startup Guide (V120)
NJ-series Controller
Controller Global Variables
Variable
VariableNameA
Variable
VariableNameB
Variable
VariableNameC