Table of Contents
Advertisement
The base station at a glance
Base A150A/A250A
2
6
1
Base A150/A250
ECO DECT
During a call, the level of the handset's radio signal adjusts automatically according to the distance between the hand-
set and base station: the shorter the distance, the lower the signal strength (radiation).
The handset's radio signal is switched off when it is in standby mode. The base station, however, maintains contact
with the handset with fewer radio signals.
In addition, the base station radio signals are switched off when the No Radiation setting is enabled.
¤ u
¤
MENU
Settings
½
icon
in the left-hand corner of the display)
Please note
◆
All registered handsets must support this feature.
◆
For quick connection of incoming calls the handset repeatedly switches to reception mode for short periods. This
increases energy consumption and therefore reduces the standby and talk times.
1 Registration/paging key:
Search for handsets (press briefly, "Paging"
Register handsets (press and hold
2 Volume keys: (– = quieter; + = louder)
During message playback: adjust the speaking volume.
While phone is ringing: adjust ringer melody volume.
3 Play/Stop key:
5
Switch answer machine on and off (press and hold);
4
play back new messages from answer machine (press briefly);
3
during message playback: cancel playback (press briefly).
Lights up: Answer machine is activated.
Flashes: You have at least one new message or a message is played
back or being recorded.
Flashes very quickly: Full memory.
During message playback:
4 Skip to the start of the current message (press once) or go to the pre-
vious
1
message (press twice).
5 Go to the next message.
6 Delete current message.
¤ u
¤ u
¤
OK
Base
OK
2
¤
¤
ECO DECT
OK
No Radiation
¢
S. 10).
¢
S. 10).
‰
¤
OK (
= radiation switched off,
Advertisement
Table of Contents
