Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rikaline GPS-300
Summary of Contents for Rikaline GPS-300
-
Page 1: Gps Receiver
Rikaline GPS-300 GPS Receiver User’s Guide Dec. 26, 2003 Rikaline International Corp. 10F, 64, Kang-Ding Road, Taipei 108, Taiwan, R.O.C. Phone: +886-2-2370-4688 Fax: +886-2-2370-4686 E-Mail: info@rikaline.com.tw Web: www.rikaline.com.tw All Right Reserved... -
Page 2: Table Of Contents
……….………………………………………………………………………………….. 0. Quick USE 0.1 Check GPS Package 0.2 Check Connector 0.3 Connect GPS-300 to your machine 0.4 Turn on your machine 1. Introduction ……………………………………………………………………………………….. 1.1 Overview …………………………………………………………………………………….. 1.2 Features …………………………………………………………………………………….. 1.3 Technical Specifications 2. Operational Characteristics 2.1 Initialization …………………………………………………………………………………. -
Page 3: Quick Use
Be sure to connect car power after IGNITION SWITCH to prevent running out of power if you forget to switch off GPS-300 when you get off the car. If you like your unit always stays at ON, you may connect the unit before ignition switch. -
Page 4: Introduction
RS-232 or TTL and saves critical satellite data by built–in backup memory. With low power consumption, the GPS-300 tracks up to 12 satellites at a time, re-acquires satellite signals in 100 ms and updates position data every second. - Page 5 4) SiRF protocol. Rikaline International Corp. Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 GPS-300 Operating Manual 5-25 meter CEP with SA off 0.1 meters/second, with SA off microsecond synchronized GPS time 1 to 5 meter, typical 0.05 meters/second, typical...
-
Page 6: Operational Characteristics
If significant inaccuracy exists in the initial data, or the orbital data is obsolete, it may take more time to achieve a navigation solution. The GPS-300 Auto-locate feature is capable of automatically determining a navigation solution without intervention from the host system. However,... -
Page 7: Hardware Interface
4.72"(W) x 3.15" (D) x 1.02"(H). 3.2 Hardware Interface The GPS-300 includes a GPS receiver and constant voltage regulator in a metal box. After installation, connect the power cable, active antenna and data cable, you will have a deluxe great GPS unit in your mobile living facility. -
Page 8: Power Cable
2. Connector: DB9 female at 2 ends 3. Positioning status LED: at device end 4. Part No.: A-6018-C 3.3.1.1 DB9 Female Connector Function Definition: GPS end (close to GPS-300 main unit) 3.3.1.2 DB9 Female Connector Function Definition: Device end (close to PC) 3.3.2 Power Cable 3.3.2... -
Page 9: Active Antenna
Size: 170(L) x 5(W) x 1(T) mm 3.3.7 Bracket w/ 2 screws The GPS-300 is equipped with a standard bracket for installing in the car. Part No. 80014 you may fix it by using enclosed screws or cable ties. 3.4 Optional Accessories 3.4.1 A-6019 Series PDA Date Cable... -
Page 10: Usb Driver
5. Warranty The GPS-300 is warranted to be free from defects in material and functions for one year from the date of purchase. Any failure of this product within this period under normal conditions will be replaced at no charge to the customers. -
Page 11: Appendix A Software Inferface
Version 2.1, RTCM Special Committee No.104). A.1 NMEA Transmitted Messages The GPS-300 supported by SiRF Technology Inc. also outputs data in NMEA-0183 format as defined by the National Marine Electronics Association (NMEA), Standard. The default communication parameters for NMEA output are 4800 baud, 8 data bits, stop bit, and no parity. - Page 12 Table A-8 contains the values for the following example: $GPGSV,2,1,07,07,79,048,42,02,51,062,43,26,36,256,42,27,27,138,42*71 $GPGSV,2,2,07,09,23,313,42,04,19,159,41,15,12,041,42*41 Rikaline International Corp. Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 GPS-300 Operating Manual Units GLL protocol header ddmm.mmmm N=north or S=south dddmm.mmmm E=east or W=west hhmmss.sss...
- Page 13 Reference Course Rikaline International Corp. Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 GPS-300 Operating Manual Units GSV protocol header Range 1 to 3 Range 1 to 3 Range 1 to 12 Channel 1 (Range 1 to 32)
-
Page 14: Rtcm Received Data
The default communication parameters for DGPS Input are 9600 baud, 8 data bits, stop bit, and no parity. Position accuracy of less than 5 meters can be achieved with the GPS-300 by using Differential GPS (DGPS) real-time pseudo-range correction data in RTCM SC-104 format, with message types 1, 5, or 9. As using DGPS receiver with different communication parameters, GPS-300 may decode the data correctly to generate accurate messages and save them in battery-back SRAM for later computing. -
Page 15: Appendix B Earth Datums And Output Setting
GPS receiver. If your software uses different sentence, please choose the sentences you need. After above actions, the new setting will be kept in SRAM. If no power supplied to GPS-300 for more than than 30 days, user must re-set again when power on. -
Page 16: Appendix C Products Information
Appendix C C.1 Standard Package Main Unit: GPS Receiver and Power Converter built in the housing. Mounting Accessories: Metal Bracket + 2 Screws (for plastic) Comes Fixed with Glue Cable Ties x 4 pieces Velcro x 1 Set Power Cable: 1.5m with connector & Fuse + Rocker Switch +2m Baring End + 2 Close-end Wire Connector x 3 Sets in Different Diameter. - Page 17 A-2006-AL PDA Holder, Suction Cup, 150mm Long Arm, 3-Claw A-2007 A-2008 C.3 Application Combination C.3.1 For Car Navigation C.3.1.1 For PC w/RS-232 Interface 1. GPS-300 with standard accessories. C.3.1.2 For PC w/USB Interface 1. GPS-300 with standard accessories. 2. A-6020 C.3.1.3 For PDA Application GPS-300 with standard accessories A-6019 Series C.3.1.4 For Other Land Application...