Section 15.4 Audio - Panasonic AV-HLC100E Operating Instructions Manual

CLIP STILL
AND
CLIP and STILL appear first in the top level CFG SRC menu, ahead of Inputs 1-8. This is to provide quick
access to player controls unique to these two modules. For example, selecting CFG SRC > CLIP reveals
PREV, STOP, PLAY, and NEXT controls on the LED display.
Select Trans
When you press SELECT TRANS, the Menu group shows options labeled TRNS 1-8. Making a selection,
using the buttons below the LED display, selects the transition effect from the transition bin preset slot
for the video layer currently selected in the Switcher Delegates button group beside the Fader lever (see
Section 15.3.2).
The Audio control group, at upper left on the surface, includes a Volume knob, LED VU meter, and
SETUP (configure) button.
FIGURE 101

Section 15.4 Audio

• VU meter – displays Master output volume. The red LED at the top indicates
that clipping has occurred.
• Volume – by default, adjusts the Master volume level, but can be used in
conjunction with the SETUP button to control the level of individual channels
from selected sources.
• SETUP – provides similar functionality to the CFG SRC button in the Switcher
group (discussed previously).
o Pressing the SETUP button causes the LED display in the Menu control
group to list all audio sources.
o Making a selection (using the buttons beneath the display) shows CFG
SRC and GAIN items for each audio channel from the source.
CFG SRC - this option allows you to select from the following:

• Silence
Follow Video (default)
•
• Local - one of the hardware audio inputs (Input 1-4), the
motherboard microphone jack, shown as Micr Real (an
abbreviation form of "Microphone (Realtek)"), and Skype TX
Caller.
Or any other detected input, including NDI audio sources.
•
GAIN – the Volume knob will control the level of the selected channel.

97