Panasonic AV-HLC100E Operating Instructions Manual page 38

FIGURE 23
To add a custom group to either the Receive or Output tab, click the New button in the footer of the panel.
R S
EMOTE OURCES
FIGURE 24
The Remote Sources tab is somewhat similar to the Receive Groups tab, in that its entries add sources
to the list of those visible to NDI enabled applications on the local host.
The difference is that that entries in the Remote Sources do not identify NDI groups, but rather individual
remote NDI and *NDI|HX sources (including Panasonic cameras supporting NDI|HX). Remote sources
are identified in this panel by their IP address, rather than their NDI device or channel name.
* To receive NDI|HX sources, the NewTek NDI|HX driver for Windows must be installed on AV-HLC100.
®
Note that sources listed in this panel can traverse subnets on the local network, and even connect across
different networks when specific criteria are met. (This may require your IT team to open specific ports
for this traffic. Please refer to NDI documentation for more information on these advanced topics.)
38