Panasonic AV-HLC100E Operating Instructions Manual page 51

480i, 4:3
• NTSC digital format , standard definition, interlaced
• 720x480 pixels, 4:3 picture aspect or anamorphic 16:9 picture aspect
• Optionally carries embedded audio
*2 576, 16:9
• PAL analog format, Standard definition, interlaced
• 720x576 pixels, anamorphic 16:9 picture aspect
• Connected by SDI input connectors
• Optionally carries embedded audio
*2 576, 4:3
• PAL digital format , standard definition, interlaced
• 720x576 pixels, 4:3 picture aspect
• Connected by SDI input connectors
• Optionally carries embedded audio
*1 The 'telecine' option removes '2:3 pull-up' in output from cameras claiming 24PsF but actually supplying video
at 30 fps (to make it suitable for 24P sessions).
*2 PAL connection type.
Video Delay
The Video Delay setting can be very helpful in cases where upstream audio processing results in sound
arriving at AV-HLC100's inputs 'late'.
Low Bandwidth
FIGURE 44
The Low Bandwidth switch is shown for NDI sources, and allows you to request a lower quality signal.
You might use this option for inputs that aren't needed at high resolution – for example a game clock
camera that you intend to show as a Picture in Picture overlay – or to reduce bandwidth requirements on
congested or slow networks.
51