HP J9827A Installation Manual page 7

Module
HPE 20-port Gig-T / 2-port
10-GbE SFP+ v2 zl Module
1
(J9548A)
HPE 20-port Gig-T / 4-port
SFP v2 zl Module (J9549A)
HPE 24-port Gig-T v2 zl
1
Module (J9550A)
HPE 12-port Gig-T / 12-port
SFP v2 zl Module (J9637A)
HPE Advanced Services v2
zl Module with HDD
(J9857A)
HPE 5400R zl2
Management Module
(J9827A)
1
Description
Auto-MDIX) feature and support
IEEE 802.3at PoE+.
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
and 2 ports for installing any of the
supported HPE transceivers. All
RJ-45 ports have the IEEE 802.3ab
Auto MDI/MDI-X (HPE Auto-MDIX)
feature. This module does not
support IEEE 802.3at PoE+.
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
and 4 ports for installing any of the
supported HPE transceivers. All
RJ-45 ports have the IEEE 802.3ab
Auto MDI/MDI-X (HPE Auto-MDIX)
feature. This module does not
support IEEE 802.3at PoE+.
24 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
operation over Category 5 or better
100-ohm UTP or STP cable
(category 5e recommended for
Gigabit). All ports have the IEEE
802.3ab Auto MDI/MDI-X (HPE
Auto-MDIX) feature.This module
does not support IEEE 802.3at
PoE+.
12 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
operation over Category 5 or better
100-ohm UTP or STP cable
(category 5e recommended for
Gigabit) and 12 ports for installing
any of the supported HPE
transceivers. All RJ-45 ports have
the IEEE 802.3ab Auto MDI/MDI-X
(HPE Auto-MDIX) feature and
support IEEE 802.3at PoE+.
The HPE Advanced Services v2 zl
module is a converged networking,
computing, and virtualization
solution inside the 5400 zl, 8200 zl,
and 5400R zl2 switch families that
hosts VMware vSphere(R)
compatible virtual networking or
business applications inside the
switch.
Is a management module for use
with HPE 5400R series chassis
only. Order module provides a dual,
redundant deployment (base
system comes with a single
module) or for onsite sparing.
For the HPE 5400R zl2 Switches 7