Programmable Settings - Worcester DT20RF Instruction Manual

Digistat - radio frequency controlled room thermostat with twin channel digital programmer
Hide thumbs Also See for DT20RF:
Table of Contents

Advertisement

8_716_115_495a
9/2/09
DT20RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 495a (02.2009)
11:49
Page 15
Setting Central Heating (CH) MON - FRI
1. Press set? until SET and PROG? are shown in
the display.
2. Press OK to enter program.
3. Press OK to select MON-FRI.
4. Press OK to select CH.
NOTE: Speed up the display by holding down
5. Press + or - to change the ON time.
6. Press set? to set the ON time and select the
OFF time.
7. Press + or - to change the OFF time.
8. Press set? to set the OFF time and select the
next ON time.
Repeat operations 5 to 8 to set the second and
third CH ON/OFF times.
NOTE: After pressing set? for the third CH OFF
Setting Hot Water (HW) MON - FRI
9. Press OK to select the first ON time.
Repeat operations 5 to 8 to set the first, second
and third HW ON/OFF times.
NOTE: After pressing set? for the third HW OFF
DT20RF RECEIVER

PROGRAMMABLE SETTINGS

the + or - buttons.
time the display shows SET MON ...see
next page.
time the display shows SET MON ...see
next page.
OPERATING & INSTALLATION
INSTRUCTIONS
13

Advertisement

Table of Contents
loading

Table of Contents