Operation
Operating principles
This ceramic cooktop is equipped with
electronic sensor controls which react
to finger contact. For safety reasons, in
order to switch the cooktop on, the On/
Off sensor needs to be touched for a
little longer than the other sensors.
Each time you touch a sensor, an
audible tone sounds.
Only the printed On/Off symbol is
visible when the cooktop is switched
off. More sensors light up when the
cooktop is switched on.
30
Malfunction due to dirty and/or
covered sensors:
If the sensors are dirty or covered,
this could cause them to fail to react,
to activate a function or even to
switch the cooktop off automatically
(see "Safety switch-off"). Placing hot
pans on the sensors/indicators can
damage the electronic unit
underneath.
Keep the sensors and indicators
clean and do not place anything on
top of them. Do not place hot pans
on them.