Setting Up Wpa-Psk [Tkip] Or Wpa2-Psk [Aes] Security - NETGEAR WNCE2001 User Manual

Setting Up WPA-PSK [TKIP] or WPA2-PSK [AES] Security

To configure WPA-PSK (TKIP) or WPA2-PSK (AES) security:
1. Run the WNCE2001 Smart Wizard.
a. Make sure that the WiFi Internet adapter is fully inserted in a USB port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab displays.
2. Configure the security settings.
a. In the Profile field, select the profile, or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
c. In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the
passphrase.
Figure 2-1
For more about WPA2-PSK, click the link to
Appendix B.
3. Save your settings in a profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Universal WiFi Internet Adapter WNCE2001 User Manual
matches exactly what is configured in the access point.
v1.0, April 2010
"Wireless Networking Basics" in
2-3