Table of Contents
Advertisement
Connecting one ET6 expansion module
•
Insert the USB plug attached to the cable of the VTech ET6 into the USB port
on the VTech phone. If the phone has two USB ports, either one of them can
be used (Fig. 6 and Fig. 7).
Fig. 6
The LEDs on the ET6 expansion module will light up briefly if or when the
phone is connected to power, then turn off, indicating that the function keys
are now ready for configuration and/or use.
If the ET6 expansion module is not listed in Settings
Fkeys > Keys on UXM 1, reboot the phone.
Fig. 7
10
> Preferences >
Advertisement
Table of Contents
