Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for VTech ET6
Summary of Contents for VTech ET6
- Page 1 Expansion Module Quick Start Guide...
-
Page 2: Important Safety Information
2. Read and understand all instructions. 3. Follow all warnings and instructions marked on the product. 4. This product is for use with VTech ET6xx phones with USB ports only. Do not connect the expansion module to a PC or other telephones. - Page 3 10. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied at the premises, consult your dealer or local power company. 11. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on.
- Page 4 16. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 17. Do not use the expansion module or its connected telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle.
- Page 5 FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 6: About This Guide
About this Guide This quick start guide provides a reference for the external features of the ET6 expansion module and basic installation instructions. Please refer to the ET6 User Guide for complete installation and operation instructions. You can download the guide from businessphones.vtech.com... -
Page 7: Quick Reference Guide
Quick Reference Guide External Features and Controls FUNCTION DISPLAY FUNCTION KEYS 1-9 AREA KEYS 10-18 with LEDs with LEDs... -
Page 8: Attaching The Footstand
Attaching the Footstand The footstand can be attached at two different angles: 28° and 46°. 1. Place the top of the grooves on the footstand (Fig. 1) below the slideguides on the back of the device (Fig. 2). For the upright position, the short “legs”... - Page 9 The connector is used to connect the footstand of the first ET6 to the footstand of the phone, the second ET6 to the first one, and the third ET6 to the second one in the daisy-chain. On either side of the connector there are “hooks” (Fig. 5) that fit into the slideguides on the footstand (see Fig.1 in “Attaching the Footstand”...
- Page 10 Connecting one ET6 expansion module • Insert the USB plug attached to the cable of the VTech ET6 into the USB port on the VTech phone. If the phone has two USB ports, either one of them can be used (Fig. 6 and Fig. 7).
- Page 11 Connecting two ET6 expansion modules Very important when two expansion modules are connected to the phone: • The modules must be daisy-chained, as shown in Fig. 8. If they are not, the phone will not be able to find and identify the function keys, and you will not be able to use them.
- Page 12 The LEDs on the ET6 expansion modules will light up briefly, then turn off, indicating that the function keys are now ready for configuration and/or use. If the ET6 expansion modules are not listed in Settings > Preferences > Fkeys > Keys on UXM [1-2], reboot the phone.
- Page 13 Connecting three ET6 expansion modules Very important when three expansion modules are connected to the phone: • The modules must be daisy-chained, as shown in Fig. 10. If they are not, the phone will not be able to find and identify the function keys, and you will not be able to use them.
-
Page 14: Maintenance
The LEDs on the ET6 expansion modules will light up briefly, then turn off, indicating that the function keys are now ready for configuration and/or use. If the ET6 expansion modules are not listed in Settings > Preferences > Fkeys > Keys on UXM [1-3], reboot the phone. -
Page 15: Technical Specifications
Operating temperature 32–104 °F (0–40 °C) AC adapter output voltage 5.0 Vdc @ 2 A AC adapter model number VTech model #: VSP-PWR2000 SIL model #: SSA-050200US Ten Pao model # S018BAM0500200 Connectors 1 USB port, type A, USB 2.0;... - Page 16 VTECH COMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008. VTech is a registered trademark of VTech Holdings Limited. Copyright © 2018 for VTECH COMMUNICATIONS LTD. All rights reserved.