Advertisement
6
IP Configuration
Expand the "system tree" and select IP configuration.
o
Enter the IP Address, Subnet Mask, and Gateway
o
provided by your Network Administrator.
Save the changes.
o
Disconnect the stand alone PC from the switch and
o
connect the switch to the network.
Inform your Network Administrator that the IP Address
o
has been changed.
NOTE: The User Manual contains instructions for
o
assigning the IP Address from a DHCP Server and
to allow the switch to act as a DHCP Server.
7
User Name and Password
This step should be accomplished by the Network
o
Administrator.
Log onto the switch from a PC connected to the
o
network.
Expand the "System Tree" and select user
o
authentication..
Enter the new User Name and Password. Record this
o
information in the space provided below. File this
document for future reference.
Click the Apply button.
o
USER NAME: ______________________________________
PASSWORD:_______________________________________
MAC ADDRESS: ____________________________________
IP ADDRESS: _______________________________________
Basic Configuration is complete. A
comprehensive Manual is contained on the CD
ROM. Refer to this manual to configure the
advanced features of this switch.
815-433-5100 Fax 433-5104
+353 91 792444 Fax +353 91 792445 www.bb-europe.com orders@bb-europe.com support@bb-europe.com
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
www.bb-elec.com
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
EIR608 Series-5107qsg
orders@bb-elec.com
support@bb-elec.com
Advertisement
