Table of Contents
Advertisement
No.
Display
• Displays the operation mode.
• Displays the set or current water temperature (°C, °F).
• Press
• The default is the current water temperature, and it can be
• The display will show Lo when the value can be displayed
• Displays the current temperature (°C, °F) of water inlet or outdoor
• Displays the current high or low pressure (MPa) of refrigerant.
• Displays the current water flow rate (m
• Displays the selected applied operation.
• Displays the operation pattern by each module and group.
• Displays the group from 1 to 4.
• Displays the module from 1 to 8.
• Displays the unit from 0 to 15 (maximum 16).
• Displays Master or Slave.
• Displayed when setting the Panel control function from a certain
NOTE
button to display the set water temperature for 3
seconds.
changed into the set water temperature in the service setting
mode.
(-199 ~ 199) or show HI when it cannot be displayed.
air.
unit.
– Panel control function is to set the unit to control the operation
itself, so the operation cannot be controlled from the module control
if this function is set.
Description
3
/h).
English
11
Hide quick links:
Advertisement
Table of Contents
