Table of Contents
Advertisement
Memory module
Description
Memory module for use in models with Core processors:
16 GB, non-ECC
●
●
8 GB, non-ECC
●
4 GB, non-ECC
Memory module for use in models with Xeon processors:
●
16 GB, ECC
●
8 GB, ECC
Before removing a memory module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the memory module:
1.
Lift the memory cover off the system board.
NOTE:
2.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
The memory cover is available in the Bracket Kit using spare part number L28674-001.
31).
33).
Spare part number
937438-850
937236-850
L10598-850
L24981-001
L24983-001
Advertisement
Table of Contents
Troubleshooting
