Verifying The Configuration - HP FlexFabric 5700 Series Configuration Manual

Route present for: 0xfffc03, press CTRL_C to break
20:00:00:0b:46:00:02:82(0xfffc01)
20:00:00:05:30:00:18:db(0xfffc02)
Fctracert uncompleted: no route to destination port.
The output shows that:
Switch A can reach Switch B.
Switch B cannot reach Switch C.

Verifying the configuration

# Use the display fc routing-table command on Switch B to verify that there is not a route to Switch C.
(Details not shown.)
128