Getting Ready To Shoot; About The Batteries - Ricoh Caplio R 3 User Manual

Getting Ready to Shoot

Turn the power on and get ready to shoot.
Note
If you have already used this camera, follow the steps below to
make sure it is turned off before removing or loading batteries.
1. Make sure the LCD monitor is turned off.
2. Make sure the protective lens barrier is closed.
For how to turn the camera off, see P.22.

About the Batteries

The following dedicated battery can be used with the camera.
• Rechargeable Battery DB-60 (Included)
This is a lithium-ion battery. This is economical
because you can recharge it using the battery charger
and use it over and over again. They last a long time,
so they are convenient for travel.
Note
Indication of the number of images you can take: Approx. 300
• Based on CIPA standard (Temperature: 23 degrees Celsius, LCD on, 30 seconds between
shots, changing the zoom setting from telephoto to wide or wide to telephoto for each shot,
50% flash usage, turning the power off after each 10 shots).
• If you set the camera to the Power-Save or Synchro-Monitor mode, the number of shots
you can take will increase.
• The number of shots is for reference only. If the camera is used for long periods of time for
setting and playback, the shooting time (the number of shots) will decrease.
16