Using The Flash - Ricoh Caplio R 3 User Manual

Using the Flash

Press the F (Flash) button to switch between flash
modes. By default, your camera is set to Flash Off.
From the front edge of the lens, flashlight reaches about
0.2 to 2.4 m (W) or about 0.14 to 1.8 m (T) when ISO
sensitivity is set to AUTO.
Flash Modes
Flash Off
Auto
Red-eye reduction
Forced Flash
Slow Synchro
1.
Switch the Mode Selector to 5.
2.
Press the F (Flash) button to switch between flash modes.
The Flash mode mark appears momentarily in a large size at the center of
the LCD monitor and then is displayed at the upper left.
During flash charging, the flash lamp keeps blinking. Once the flash is
charged, the lamp goes off and it is possible to shoot.
Note
• The settings are saved until you press the F (Flash) button to change them.
• When shooting movies or in Multi-Shot mode, the flash turns off.
• The flash fires twice to increase the AE/AF (Auto Exposure/Auto Focus) accuracy.
The flash will not fire.
When your subject is poorly lit or backlit, the flash fires automatically.
Reduces the red-eye phenomenon, in which people's eyes appear red
when shooting images of people.
The flash fires, whatever the light conditions are, when you shoot.
The flash fires with the shutter speed slowed. This is suitable when taking
portrait pictures in a nightscape. It is recommended to use a tripod.
37