Choose/Change Password - Ricoh G700 User Manual

Choose/Change Password

Choose the password that must be entered
to access password-protected settings
(GP.85). The password can be a barcode
or a phrase entered via an on-screen
keyboard.
Note -------------------------------------------------------------------------------------
The current password is required to change an existing password.
Barcode
Frame the barcode in the picture display and
press MENU/OK. If the camera can read the
code, it will set the password to the barcode
and return to the previous menu. Press DISP.
to exit without entering a new password.
Note -------------------------------------------------------------------------------------
The camera can read linear and matrix barcodes.
Linear
Caution ---------------------------------------------------------------------------------
You will be prompted to enter a password
whenever you attempt to access functions
protected using [Password Protection]. Frame
the password barcode in the picture display and
press MENU/OK. If the barcode is incorrect, a
message will be displayed; select [Yes] to return
to the password entry dialog.
Read Barcode Read Barcode
Cancel Cancel
Matrix (QR)
Read Barcode Read Barcode
Cancel Cancel
Aim the reader at the barcode Aim the reader at the barcode
and press OK. and press OK.
Execute Execute
Matrix (PDF417)
Aim the reader at the password Aim the reader at the password
barcode and press OK. barcode and press OK.
Execute Execute
7
83