Specifying A Range Of Multiple Files - Ricoh G700 User Manual

Specifying a Range of Multiple Files

1
Press the !" buttons to select [Delete Multi] and then
press the MENU/OK button.
• Omit this step if the camera is already in multi-frame view.
2
Press the !" buttons to select [Sel. Range] and then press
the MENU/OK button.
3
Press the !"#$ buttons to select
the starting point of the range of
files you want to delete and press
the MENU/OK button.
• If you make a mistake when selecting
the starting point for the range of files,
press the DISP. button to return to the
screen for selecting the starting point.
• Press the ADJ./MEMO button to switch to the display for specifying
files separately. See Step 3 and beyond on P.38.
4
Press the !"#$ buttons to select
the ending point of the range of
files you want to delete and press
the MENU/OK button.
• The trash symbol is displayed in the
upper left corner of the specified files.
• Press DISP. to cancel and return to
Step 2.
5
Repeat Steps 3 and 4 to specify all the ranges of files you
want to delete.
6
Press the D (Delete) button.
7
Press the #$ buttons to select [Yes] and then press the
MENU/OK button.
Delete Delete Delete Delete Delete Delete Delete Delete 67/89 67 67/89 89 67/89 67/89 67 67/89 89 67/89
End End End End End End End End Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel
Delete Delete Delete Delete Delete Delete Delete Delete 70/89 70/89 70 70/89 89 70/89 70/89 70 70/89 89
Start Start Start Start Start Start Start Start Delete Delete Delete Delete Delete Delete Delete Delete
4:3 F 4:3 F 4:3 F 4:3 F 4:3 F 4:3 F 3 F 3 F
4:3 F 4:3 F 4:3 F 4:3 F 4:3 F 4:3 F 3 F 3 F
39