For Macintosh; Copying Pictures To Your Computer - Ricoh G700 User Manual

For Macintosh

This camera supports the following Macintosh operating systems.
• Mac OS 9.0 to 9.2.2
• Mac OS X 10.1.2 to 10.6.3
Caution ---------------------------------------------------------------------------------
Although the software included in the CD-ROM cannot be used with Macintosh,
it is possible to display the "Software User Guide" (note that Acrobat Reader is
required to view the "Software User Guide" under Mac OS 9).

Copying Pictures to Your Computer

Follow the steps below to copy pictures to your computer.
1
Connect the camera to the computer
using the supplied USB cable.
• Turn the camera off before connecting
the USB cable.
• The camera turns on automatically when
a connection is established.
2
Copy photos to the computer.
• Copy files from the camera to the
desired location.
• When an SD memory card is
loaded, its files are displayed.
Otherwise, files in the internal
memory are displayed.
3
Disconnect the USB cable when transfer is complete.
• Drag the camera volume into the Trash and then disconnect the USB
10
cable.
104