Loading The Rechargeable Battery And Sd Memory Card - Ricoh G700 User Manual

Loading the Battery and SD Memory Card
After recharging the rechargeable battery, load the battery and the SD
memory card. Be sure the camera is off before removing the battery or
the SD memory card.
1
Turn the battery/card cover knob
toward the M mark to open the
cover.
2
Insert the rechargeable battery and
SD memory card.
• Make sure the SD memory card is
facing the right way and then push the
card all the way in until it clicks.
• When the rechargeable battery is
loaded in place, it is locked with the
hook shown in the figure.
Loading the specified dry cell batteries
(available in stores)
• Insert the batteries in the direction
shown.
3
Close and knob the battery/card
cover.
• Close the battery/card cover and rotate
the knob to the position opposite the
M icon.
Logo side
23