General Information; About These Instructions; Transport By Forklift Truck; Other Modes Of Transport - KBL megaSun space 2000 Operating Instructions Manual

General information

About these instructions

This operating manual is intended for use by
• operating staff,
• users,
• service staff.
Any person dealing with this tanning unit must have
read and understood these instructions.
This manual describes units equipped with the
maximum number of features.
Keep this manual ready to hand at all times.

Transport by forklift truck

The device is mounted on a pallet.
• Insert the forks carefully into the openings of the
pallet.
• Lift the load by a few centimetres.
• Transport the load carefully to the place of
installation.
Overturning load!
Danger of being crushed by heavy parts
of the equipment.
• Wear safety shoes.

Other modes of transport

If a forklift truck cannot be used for transport, the
box must be unpacked and the parts inside must be
transported individually to the place of installation,
e.g. using a dolly. Depending on the weight of the
components, lifting them might require several
people.
DANGER

Old equipment disposal

This device consists of components that
cannot be thrown into the household
garbage!
Dispose of your old equipment in an environmentally
friendly manner after the end of its useful life. Met-
als and plastics can be recycled. Electrical and elec-
tronic components must be disposed of as e-waste.
Fluorescent lamps must be dropped off at authorized
collection points for pollutants.
This helps to avoid damaging effects to the
environment and human health caused by improper
disposal.
This makes a valuable contribution to recycling
and other forms of utilization of old electrical and
electronic equipment.
You can obtain information about environmentally
friendly disposal from your local government or the
municipal administrations.

Service

For all service-related questions, please contact your
responsible specialist dealer.
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
5