Standby Mode / Service Mode; Layout Of The Display Numbers; Switching The Decorative Lighting On And Off; Aquacool Spraying Test - KBL megaSun space 2000 Operating Instructions Manual

Standby mode / service mode

While the tanning unit is in standby mode, you can
switch the decorative lighting of the device on and
off and trigger an aquaCool spraying test (1 spraying
cycle).
When the unit is in service mode, you can make the
presettings for operation in tanning mode, and you
can have values concerning the operation of the
device displayed.

Layout of the display numbers

The buttons of the interior display are allocated
double functions. In addition to the standard
operating elements, they stand for numbers that,
in standby mode, provide access to standby and
service functions. Simply enter the corresponding
sequence of numbers on the display.
1 2
6 7
3 4 5
8 9 0
Switching the decorative
lighting on and off
5 0
NOTE
The connection times of the decorative lighting can
be set in the service menu individually for each day
of the week.
There are two independent connection periods (A
and B) available for each day of the week.

aquaCool spraying test

4 9

Invoking the service menu

1 6 1 0 0 0 0
NOTE
Do not let too much time pass between the individual
keystrokes when entering a sequence of numbers!
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
5
4
PIN
19