Maintenance And Cleaning; Instructions For Cleaning And Care; Maintenance Intervals - KBL megaSun space 2000 Operating Instructions Manual

Maintenance and cleaning

Regular maintenance is required for the safe opera-
tion of the towers and has to be documented. Clean-
ing is to be performed when necessary.
Live parts
Risk of fatal injury due to electric shock
when touching live parts.
• Disconnect from mains and secure
against reconnection!
• USE ONLY ORIGINAL SPARE PARTS.
• Replace illuminants and filters only with ones
wich are characterized on the device.
Instructions for cleaning and
care
GENERAL
Before starting to clean the unit, take off any rings,
bracelets, watches, etc. that you might be wearing in
order to avoid scratching the surfaces.
Cleaning fluid must not run into the appliance.
TUBES
To preserve the tanning power, we recommend
cleaning the tubes and UV lamps with warm water
and a chamois after approx. 200 hours of operation.
ACRYLIC PANES
For cleaning the acrylic panes, use the special
cleansing agent and disinfectant "megaClean" sup-
plied by KBL and dilute it in water at a ratio of 1:13.
DANGER
VARNISHED AND PLASTIC PARTS
To clean the varnished and plastic surfaces, use a
damp soapy cloth.
Do not clean the big plastic parts with a dry cloth.
This might scratch the surfaces!
To clean the mirror plate of the floor, proceed as follows:
Use a damp chamois and spray megaClean onto
it sparingly. Then wipe the surfaces clean. NEVER
CLEAN WITH A DRY CLOTH!
Prevent the corners and edges from getting wet.
CLEANING AGENTS
The surfaces and the acrylic panes must not be
cleaned with concentrated disinfectants or sol-
vents or other liquids that contain alcohol!

Maintenance intervals

Component/
Cleaning
wearing part
Tubes after
Tubes and approx. 200
starters operating
hours
When
Acrylic panes
necessary
aquaCool When
nozzles necessary
Colour filters
When
of unit light-
necessary
ing
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
Replacement
After 500 operating
hours
When necessary
After approx. 1000
operating hours
Whenever UV
tubes are replaced
35