Integrating The Receiver Into A Network With Dhcp; Integrating The Receiver Into A Network Without Dhcp Using Auto Ip - Sennheiser SL Rack Receiver DW Manual

Speechline digital wireless
Table of Contents

Advertisement

Integrating the receiver into a network with DHCP

The receiver obtains the IP address from the DHCP server. You can see this
address in the Network Settings menu on the receiver (see „Using the op-
erating menu of the receiver").
To add the receiver in the Sennheiser Control Cockpit:
Use the Add Device function in the Sennheiser Control Cockpit and
enter the IP address you saw in the settings menu.
Or:
Activate the mDNS function in the receiver's Network Settings menu
(factory setting: deactivated).
Restart the receiver.
Once restarted, the receiver is automatically detected in the Sennhe-
iser Control Cockpit.
mDNS = multicast Domain Name System: resolves host names to
IP addresses within small networks that do not include a local name
server. Used for automatic device discovery.

Integrating the receiver into a network without DHCP using Auto IP

If there is no DHCP server in the network and you are working with auto-
matically generated IP addresses, please observe the following informa-
tion.
Set the Mode to Automatic in the receiver's Network Settings menu.
Ensure that the host PC on which the Sennheiser Control Cockpit ser-
vice is installed is configured so that the IP address is assigned auto-
matically, rather than a static configuration.
After several minutes, all receivers in the network will receive a
address in the range of 169.254.x.x. You can see this address in the Net-
work Settings menu on the receiver (see „Using the operating menu of the
receiver").
To add the receiver in the Sennheiser Control Cockpit:
Use the Add Device function in the Sennheiser Control Cockpit and
enter the IP address you saw in the settings menu.
Or:
Activate the mDNS function in the receiver's Network Settings menu
(factory setting: deactivated).
Restart the receiver.
Once restarted, the receiver is automatically detected in the Sennhe-
iser Control Cockpit.
mDNS = multicast Domain Name System: resolves host names to
IP addresses within small networks that do not include a local name
server. Used for automatic device discovery.
SL Rack Receiver DW
link-local
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents