Download Print this page
Sennheiser MKE 1 Quick Start Manual

Sennheiser MKE 1 Quick Start Manual

Hide thumbs Also See for MKE 1:

Advertisement

Quick Links

MKE 1
The smallest Sennheiser clip-on microphone
The MKE 1 is a high-quality, sub-miniature clip-on microphone which
combines outstanding sound quality and rugged design with extre-
mely small dimensions. To ensure continuous optimum performance,
please observe the following care and cleaning instructions.
General care instructions
Use the MZC 1-1 and MZC 1-2 frequency response caps
and the MZC 1-3 make-up protectors to avoid soiling and
dysfunctions.
Store the MKE 1 in a dry, dust-free environment.
Avoid extreme bending and tearing of the cable.
Avoid knots in the cable.
Microphone head
Anti-kink sleeve
Microphone sound inlet
Make-up protector
Frequency response cap
Connector
The MZC 1-1 and MZC 1-2 frequency response caps
To wear the MKE 1 directly on the skin, use the large MZC 1-2 fre-
quency response cap which offers an extended protection against
the ingress of sweat.
Regularly clean or replace the frequency response caps to avoid sound
alterations.
Cleaning after use
Remove the frequency response cap from the microphone capsule.
Hold the microphone by the cable and
Use a
fine
bristle brush and isopropyl alcohol to remove make-up
residues and other buildup from the gauze.
not
by the anti-kink sleeve.
Gauze

Advertisement

loading

Summary of Contents for Sennheiser MKE 1

  • Page 1 The MZC 1-1 and MZC 1-2 frequency response caps combines outstanding sound quality and rugged design with extre- To wear the MKE 1 directly on the skin, use the large MZC 1-2 fre- mely small dimensions. To ensure continuous optimum performance, quency response cap which offers an extended protection against please observe the following care and cleaning instructions.
  • Page 2 Special cleaning for the MKE 1 M variants Only use distilled water and a slightly damp cloth to clean the cable. use any solvents such as isopropyl alcohol, as these can damage the surface.