Table of Contents
Advertisement
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure onto which you are mounting the product can support the product's
weight. See the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
The bracket adjustment knob allows for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knob manually. Using tools could damage the knob.
Procedure
The Ovation ED-200WW comes with a hanging/mounting bracket to which mounting clamps can be
attached. The bracket has 13-mm holes, which are appropriate for this purpose. Be sure the clamps used
are capable of supporting the weight of this product. Use at least one mounting point per product where
necessary.
Mounting Diagram
Safety Cable
Secure the safety cable using the
passageway on the top of the
Alternate
Yoke
Page 8 of 28
for weight information.
Ovation ED-200WW User Manual Rev. 1
Setup
Safety
Notes.
Mounting Clamp
Mounting Bracket
Bracket Adjustment Knob
Advertisement
Table of Contents
