Program; Storing Your Settings - Ricoh Aficio 470W Operating Instructions Manual

Program

You can store frequency used copy
job settings in machine memory, and
recall them for next use.
The Program function includes the
following settings.

Storing Your Settings

You can store settings you fre-
quency use.
Deleting A Program
You can delete a stored program.
Recalling A Program
You can recall a stored program.
Note
You can store up to 20 programs.
You can only select paper roll as
the paper source on the screen.
You cannot store the paper type or
size.
If you store the settings in the pro-
gram sheet, you can create a list.
See P.157 "Program Record Sheet"
Immediately after the machine is
turned on, after Auto Reset, or af-
ter a reset, the settings are set to
those stored in program No. 20.
See P.126 "Initial Mode Set"
The stored settings are stored even
after the power is turned off, or the
{Clear Modes/Energy Saver} key is
pressed, they have not been delet-
ed.
Storing Your Settings
A
Edit the copy settings so that all
functions you want to store in this
program are selected.
B
Press the { { { { Program} } } } key.
The Program screen is displayed.
C
Press the [Store] key.
D
Press the program number you
want to store.
When the settings are successfully
stored, the m indicator appears.
Note
m indicates that program is al-
ready stored.
Program
2
ZEDS071E
53